About PSI Services Products Informational Readings Companies we Represent Business Opportunities Employment Opportunities Links

Installation Instructions
for Remote Disturbance Counter Connection
for a Wye Configured Unit

BEFORE PERFORMING ANY WORK DE-ENERGIZE THE UNITS

The remote disturbance counter box contains a terminal block labeled "A", "B", "C", "N" and "G". A hole must be drilled in the remote disturbance counter box to allow wiring entry. Five wires can be connected to the terminal block inside the Remote Disturbance Counter box via the drilled hole. The other end of these wires must be bolted to the "A", "B", "C", "neutral" and "ground" terminals on the MERF in the Current Technology suppression filter system. After wiring is completed, the CTI unit can be re-energized. The customer the Current Technology suppression filter system to the remote disturbance counter with #20AWG wire.

Dimensions of Disturbance Counter: 10"H x 7"W x 4.5"D

Type of Enclosure: Nema 4

Remote Disturbance Counter

MERF inside Current Technology suppression filter system

For more information about these or any other surge protection products or to speak with one of our sales reps, please contact us.

Tel: 407-380-9200 Fax: 407-380-3911 Email: jwest@psihq.com

About PSI Services Products Informational Readings Companies we Represent Business Opportunities Employment Opportunities Links


Copyright 1999 Current Technology. All Rights Reserved.